|
| void | SetTreatFileAsLoopingForAnalysis (bool Value) |
| | Whether or not we should treat the sound wave used for analysis (this or the override) as looping while performing analysis. A looping sound may include the end of the file for inclusion in analysis for envelope and FFT analysis.
|
| void | SetbEnableBakedFFTAnalysis (bool Value) |
| | Whether or not to enable cook-time baked FFT analysis.
|
| void | SetbEnableAmplitudeEnvelopeAnalysis (bool Value) |
| | Whether or not to enable cook-time amplitude envelope analysis.
|
| void | SetbLooping (bool Value) |
| | If set, when played directly (not through a sound cue) the wave will be played looping.
|
| bool | GetbMature () const |
| | If set to true if this sound is considered to contain mature/adult content.
|
| void | SetbMature (bool Value) |
| | If set to true if this sound is considered to contain mature/adult content.
|
| bool | GetbManualWordWrap () const |
| | If set to true will disable automatic generation of line breaks - use if the subtitles have been split manually.
|
| void | SetbManualWordWrap (bool Value) |
| | If set to true will disable automatic generation of line breaks - use if the subtitles have been split manually.
|
| bool | GetbSingleLine () const |
| | If set to true the subtitles display as a sequence of single lines as opposed to multiline.
|
| void | SetbSingleLine (bool Value) |
| | If set to true the subtitles display as a sequence of single lines as opposed to multiline.
|
| void | SetbIsAmbisonics (bool Value) |
| | Whether or not this source is ambisonics file format. If set, sound always uses the 'Master Ambisonics Submix' as set in the 'Audio' category of Project Settings' and ignores submix if provided locally or in the referenced SoundClass.
|
| void | SetbEnableCloudStreaming (bool Value) |
| | If enabled, this wave may be streamed from the cloud using the Opus format. Loading behavior must NOT be Force Inline. Requires a suitable support plugin to be installed.
|
| TArray< FSoundWaveCuePoint > | GetLoopRegions () const |
| | Filters for the cue points that are loop regions and returns those as a new array.
|
| ESoundAssetCompressionType | GetSoundAssetCompressionType () const |
| | Returns the sound's asset compression type.
|
| void | SetSoundAssetCompressionType (ESoundAssetCompressionType InSoundAssetCompressionType, bool bMarkDirty=true) |
| | Procedurally set the compression type.
|
| TArray< FSoundWaveCuePoint > | GetCuePoints () const |
| | Filters for the cue points that are not loop regions and returns those as a new array.
|
| void | SetbEnableBaseSubmix (bool Value) |
| | If enabled, sound will route to the Master Submix by default or to the Base Submix if defined. If disabled, sound will route ONLY to the Submix Sends and/or Bus Sends.
|
| bool | GetbOverrideConcurrency () const |
| | Whether or not to override the sound concurrency object with local concurrency settings.
|
| void | SetbOverrideConcurrency (bool Value) |
| | Whether or not to override the sound concurrency object with local concurrency settings.
|
| bool | GetbEnableBusSends () const |
| | Whether or not to enable sending this audio's output to buses.
|
| void | SetbEnableBusSends (bool Value) |
| | Whether or not to enable sending this audio's output to buses.
|
| void | SetbDebug (bool Value) |
| | When "au.3dVisualize.Attenuation" has been specified, draw this sound's attenuation shape when the sound is audible. For debugging purposes only.
|
| void | SetbEnableSubmixSends (bool Value) |
| | Whether or not to enable Submix Sends other than the Base Submix.
|
| bool | GetbBypassVolumeScaleForPriority () const |
| | Bypass volume weighting priority upon evaluating whether sound should remain active when max channel count is met (See platform Audio Settings).
|
| void | SetbBypassVolumeScaleForPriority (bool Value) |
| | Bypass volume weighting priority upon evaluating whether sound should remain active when max channel count is met (See platform Audio Settings).
|
| bool | MarkPackageDirty () const |
| void | RemoveFromRoot () |
| bool | GetIsRooted () const |
| bool | IsTransient () const |
| bool | Modify (bool bAlwaysMarkDirty=true) |
| void | SetTransactional (bool bTransactional) |
| bool | IsSupportedForNetworking () const |
| UClass | GetClass () const |
| UObject | GetOuter () const |
| UObject | GetTypedOuter (TSubclassOf< UObject > Target) const |
| | Traverses the outer chain searching for the next object of a certain type.
|
| UPackage | GetOutermost () const |
| UPackage | GetPackage () const |
| void | AddToRoot () |
| UWorld | GetWorld () const |
| FName | GetName () const |
| FString | GetFullName (const UObject StopOuter=nullptr) const |
| FString | GetPathName (const UObject StopOuter=nullptr) const |
| bool | IsA (const UClass Class) const |
| | Returns true if this object is of the specified type, or a child of that type.
|
| void | SaveConfig () |
| void | LoadConfig () |
| void | ReloadConfig () |
| void | CopyScriptPropertiesFrom (const UObject OtherObject) |
| void | opCast (?&Address) const |
| FString | ToString () const |
| USoundWave | OverrideSoundToUseForAnalysis |
| | Specify a sound to use for the baked analysis. Will default to this USoundWave if not set.
|
| int | EnvelopeFollowerAttackTime |
| | The attack time in milliseconds. Describes how quickly the envelope analyzer responds to increasing amplitudes.
|
| int | EnvelopeFollowerReleaseTime |
| | The release time in milliseconds. Describes how quickly the envelope analyzer responds to decreasing amplitudes.
|
| int | EnvelopeFollowerFrameSize |
| | How many audio frames to average a new envelope value. Larger values use less memory for audio envelope data but will result in lower envelope accuracy.
|
| int | FFTAnalysisFrameSize |
| | How many audio frames analyze at a time.
|
| int | FFTAnalysisAttackTime |
| | Attack time in milliseconds of the spectral envelope follower.
|
| int | FFTAnalysisReleaseTime |
| | Release time in milliseconds of the spectral envelope follower.
|
| ESoundWaveFFTSize | FFTSize |
| | The FFT window size to use for fft analysis.
|
| TArray< float32 > | FrequenciesToAnalyze |
| | The frequencies (in hz) to analyze when doing baked FFT analysis.
|
| const ESoundAssetCompressionType | SoundAssetCompressionType |
| | The compression type to use for the sound wave asset.
|
| ESoundwaveSampleRateSettings | SampleRateQuality |
| | Determines the max sample rate to use if the platform enables "Resampling For Device" in project settings. For example, if the platform enables Resampling For Device and specifies 32000 for High, then setting High here will force the sound wave to be at most 32000. Does nothing if Resampling For Device is disabled.
|
| int | CompressionQuality |
| | Platform agnostic compression quality. 1..100 with 1 being best compression and 100 being best quality. ADPCM and PCM sound asset compression types ignore this parameter.
|
| UAssetImportData | AssetImportData |
| const TArray< FSoundWaveCuePoint > | CuePoints |
| | Cue point data parsed fro the .wav file. Contains "Loop Regions" as cue points as well!
|
| FPerPlatformFloat | SizeOfFirstAudioChunkInSeconds |
| | How much audio to add to First Audio Chunk (in seconds).
|
| ESoundWaveLoadingBehavior | LoadingBehavior |
| | Specifies how and when compressed audio data is loaded for asset if stream caching is enabled.
|
| FSoundModulationDefaultRoutingSettings | ModulationSettings |
| | Modulation Settings.
|
| TMap< FGuid, FSoundWaveCloudStreamingPlatformSettings > | PlatformSettings |
| | Optionally disables cloud streaming per platform.
|
| ESoundGroup | SoundGroup |
| float32 | Volume |
| | Playback volume of sound 0 to 1 - Default is 1.0.
|
| float32 | Pitch |
| | Playback pitch for sound.
|
| UCurveTable | Curves |
| | Curves associated with this sound wave.
|
| TArray< FSubtitleCue > | Subtitles |
| | Subtitle cues.
|
| FString | Comment |
| | Provides contextual information for the sound to the translator.
|
| float32 | SubtitlePriority |
| | The priority of the subtitle.
|
| bool | bMature |
| | If set to true if this sound is considered to contain mature/adult content.
|
| bool | bManualWordWrap |
| | If set to true will disable automatic generation of line breaks - use if the subtitles have been split manually.
|
| bool | bSingleLine |
| | If set to true the subtitles display as a sequence of single lines as opposed to multiline.
|
| TArray< TObjectPtr< UWaveformTransformationBase > > | Transformations |
| | Waveform edits to be applied to this SoundWave on cook (editing transformations will trigger a cook).
|
| const TArray< FSoundWaveCuePoint > | LoopRegions |
| | Filters for the cue points that are loop regions and returns those as a new array.
|
| TArray< TObjectPtr< UAssetUserData > > | AssetUserData |
| | Array of user data stored with the asset.
|
| USoundAttenuation | AttenuationSettings |
| | Attenuation settings package for the sound.
|
| UAudioPropertiesSheetAssetBase | AudioPropertiesSheet |
| UAudioPropertiesBindings | AudioPropertiesBindings |
| float32 | MaxDistance |
| | The max distance of the asset, as determined by attenuation settings.
|
| float32 | Duration |
| | Duration of sound in seconds.
|
| float32 | TotalSamples |
| | Total number of samples (in the thousands). Useful as a metric to analyze the relative size of a given sound asset in content browser.
|
| bool | bEnableBusSends |
| | Whether or not to enable sending this audio's output to buses.
|
| USoundEffectSourcePresetChain | SourceEffectChain |
| | The source effect chain to use for this sound.
|
| TArray< FSoundSourceBusSendInfo > | PreEffectBusSends |
| | This sound will send its audio output to this list of buses if there are bus instances playing before source effects are processed.
|
| TArray< FSoundSourceBusSendInfo > | BusSends |
| | This sound will send its audio output to this list of buses if there are bus instances playing after source effects are processed.
|
| USoundSubmixBase | SoundSubmixObject |
| | Submix to route sound output to. If unset, falls back to referenced SoundClass submix. If SoundClass submix is unset, sends to the 'Master Submix' as set in the 'Audio' category of Project Settings'.
|
| TArray< FSoundSubmixSendInfo > | SoundSubmixSends |
| | Array of submix sends to which a prescribed amount (see 'Send Level') of this sound is sent.
|
| USoundClass | SoundClassObject |
| | Sound class this sound belongs to.
|
| EVirtualizationMode | VirtualizationMode |
| | Virtualization behavior, determining if a sound may revive and how it continues playing when culled or evicted (limited to looping sounds).
|
| TSet< TObjectPtr< USoundConcurrency > > | ConcurrencySet |
| | Set of concurrency settings to observe (if override is set to false). Sound must pass all concurrency settings to play.
|
| bool | bOverrideConcurrency |
| | Whether or not to override the sound concurrency object with local concurrency settings.
|
| FSoundConcurrencySettings | ConcurrencyOverrides |
| | If Override Concurrency is true, concurrency settings to use.
|
| bool | bBypassVolumeScaleForPriority |
| | Bypass volume weighting priority upon evaluating whether sound should remain active when max channel count is met (See platform Audio Settings).
|
| float32 | Priority |
| | Used to determine whether sound can play or remain active if channel limit is met, where higher value is higher priority (see platform's Audio Settings 'Max Channels' property). Unless bypassed, value is weighted with the final volume of the sound to produce final runtime priority value.
|
| const UClass | Class |
| const UObject | Outer |
| const UPackage | Outermost |
| const UPackage | Package |
| const UWorld | World |
| const FName | Name |
| const bool | IsRooted |
1.16.1